Chassis Control System Error: What Causes This Problem And How To Fix It?

Why is there a chassis control system error on Nissan Rogue? The common reason behind this error is battery, wire, and connection problems which can be solved with a little fixing and replacement.

The chassis control system is necessary as it collects data about wheel speed, acceleration, g-forces, etc. Plus, it helps the driver to control the braking and turning smoothly.

Therefore, you should fix the error as soon as possible to ensure your safety. So, read along to find out the common reasons behind the chassis error and how to fix them quickly without visiting the workshop.

Common Reasons Behind Chassis Control System Error

This new control system on Nissan Rogue is useful for drivers during braking and turning the vehicle, ensuring drivers’ safety. So it’s necessary to fix chassis control errors as early as possible.

On multiple Nissan Rogue forum sites, many users suggest taking the vehicle to a car workshop to fix the issue. Undoubtedly, it’s a safer choice but expensive. Also, some of the main issues behind the error can be fixed by you.

Here are some common reasons behind the chassis control system:

Common CausesPossible Solution
Loose battery connectionFix battery connection
Dirty and dead batteryReplace the battery
ABS sensor failureFix the sensor
Ground lead issueCheck wires and connection
Defective wiring harnessFix or replace wire

Now, we’ll elaborately discuss the causes behind the chassis control system error in Nissan Rogue with their possible solutions.

Loose Battery Connection

The primary reason behind the chassis control system error Nissan Rogue car won’t start is a loose battery connection. But how?

The chassis control system in Nissan operates as the return conductor to most circuit paths. If you look at the battery and chassis, you’ll see that the negative strap of the battery is connected to the chassis. This way, the chassis can handle the task of starting the car, fans, lights, etc.

Therefore, if the bolted battery’s strap to the chassis isn’t connected properly, the chassis control will fail to start your Nissan Rogue.

Solution

If a loose battery connection is the culprit of a chassis control error, consider fixing the battery connection to solve the error.

Dirty And Dead Battery

The reason behind the chassis control system error car won’t start is mostly seen in old Nissan Rogue. As the chassis of the vehicle is connected to the battery; hence, a dead battery can’t help the chassis to complete its task as the return conductor.

Similarly, a very dirty battery can’t provide sufficient power to the chassis. Consequently, the chassis fails to operate functionally and start the Rogue.

Solution

If the battery of your Nissan vehicle is old, check whether the battery is dead or not. In that case, you should consider replacing the old one with a new one. And in case the battery is fine and connected properly, clean it and reconnect again to see if it fixes the error.

ABS Sensor Failure

The rotation and speed of wheels are monitored by the ABS sensor. This way, the ABS can control the traction and brake. With the wheel’s data received by the sensor, it can operate with enough pressure needed to safely brake the car.

ABS sensor control unit also transfers the data to the transmission, navigation, engine, and chassis control systems. So when the ABS sensor fails to operate functionally, it also fails to provide data to the chassis. Hence, an error can occur in the chassis control system.

Solution

Check the ABS sensor unit and fix or replace this compartment to fix the chassis control error.

Ground Lead Issue

The heavy black wire connects the battery’s negative terminal to your Nissan’s chassis control system. In simple words, the ground lead or strap is the base of the whole electrical system of your Nissan Rogue.

Ground wires create a bridge between all the electric sources and systems of your vehicle. Plus, make sure a seamless current relay.

Therefore, the chassis control can’t operate functionally when the ground lead has some fault and shows you an error sign.

Solution

If the chassis control system error Nissan x trail is occurring because of the ground lead wires, first, you need to find which one is the defective one. Then replace the defective ground lead with a fresh one.

Defective Wiring Harness

In case none of the above reasons is causing the chassis control error, look into all the wires that connect all the components to electric power. A wiring harness is a group of wires that transmit information and power.

If the chassis fails to deliver commands to other components due to defective wires, your car won’t start.

Solution

To chassis control system error reset, you need to find out the defective wire and fix the wire to fix the error issue.

Frequently Asked Questions (FAQs)

How to fix when chassis control system error message pops up?

To fix the chassis control system fault, you have to find out the reason first. There can be wires, batteries, or other connection problems causing chassis errors. After finding out, fix that specific issue to get rid of the error.

What is a chassis control system error?

A chassis control error indicates that the chassis module has found some fault in the active engine brake, active trace control, or the active ride control systems.

What is chassis control on a Nissan Rogue 2020?

The chassis control on a Nissan Rogue 2020 is in charge of collecting information like g-forces, wheel speed, acceleration, driving force, braking input, etc., to command the other components about what to do.

Conclusion

So you now have ideas of what can be the reason behind the chassis control system error. There can be more unknown reasons which are hard to figure out. In that case, you should take your Nissan Rogue to the car workshop and let the professional fix the problem efficiently.

You Can Also Read:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *