4L80e Shift Solenoid Location: Everything You Need to Know
Where is the 4L80e shift solenoid located in your car? It’s positioned inside the valve body of the automatic transmission. Still confused?
Well, no one blames you. It can be difficult to pinpoint the 4L80e shift solenoid if you are unaware of the overall diagram of your vehicle’s parts.
Accessing the component can be more complicated. However, you don’t have to worry about anything because this article will tell you the 4L80e shift solenoid location and how you can access it. By the end, you will have enough knowledge to get to the shift solenoid all by yourself. So keep reading.
Finding the 4L80e Shift Solenoid Location
The 4L80e shift solenoid is located on the interior part of the automatic transmission’s valve body.
Now the question may arise where this automatic transmission’s valve body is located? The answer is near the engine.
Usually, you can find this part partly underneath the engine. It is mounted to one side of the engine. Try looking at a bit lower position than the engine to identify it.
However, in order to pinpoint the location properly, you have to go underneath the car because the automatic transmission is level with the oil pan. In other words, you won’t be able to see it if you try to look at it from the side.
In the case of rear-wheel drive cars, the automatic transmission system is behind the engine, right beneath the dashboard area.
Once you have found the automatic transmission, locating the 4L80e shift solenoid here shouldn’t be any hassle.
How To Access The 4L80e Shift Solenoid Location: Step-by-Step Guide
Just knowing the location won’t help you reach the 4L80e shift solenoid. In order to work on the component, you have to learn to access the part. Taking the wrong approach here can permanently damage your vehicle’s transmission system.
So, what is the right way to access the 4L80e shift solenoid? Here’s a simple guide,
Step 1: Placing the vehicle properly
The first thing you must do is make sure the car is stably parked. Turn off the ignition and apply wheel blocks to both the front and rear tires. Though it’s not necessary to lock the front wheel, the extra security ensures 100% safety. Now your car won’t roll away while you are working on it.
Finally, raise the front end of the car. Use a car jack to perform the lift. Once the car is hoisted, place the front axles on the jack stand so that the car remains elevated.
Step 2: Make further preparation
Now, once the car is securely hoisted, crawl under the hood area and locate the transmission near the front of the hood area. Look at the driver’s side of the vehicle here.
At this point, examine the transmission carefully and locate the fluid compartment. It should be attached to the bottom of the transmission. Place a bucker or an oil pan directly under the fluid compartment.
Step 3: Empty the oil compartment
Use a wrench to remove the bolts holding the fluid compartment to the transmission. Fluids will start to leak while you keep unscrewing the bolts. This is why be as slow as possible and make sure the fluid is dripping on the pan you placed earlier.
After removing the bolts, place them aside. Then slowly pry the fluid container from the transmission and remove it properly. Use a flathead screwdriver for this.
Step 4: Locating the solenoid
Once the fluid compartment is removed, take a look inside the transmission. Here, you will find the solenoid housing area.
Your 4L80e shift solenoid is located right here. It looks like this. A red or black wire is likely connected to it.
And now, you know how to get to the 4L80e all by yourself.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
The majority of the cars can hold 12-16 quarts of transmission fluid. It takes about 5 to 10 minutes for the full fuel compartment to flush out all the transmission fluid.
The 4L80e transmission is controlled by electrical power. This electronic power comes from the powertrain control module.
The speed sensor of 4L80e transmission is on the driver’s side. It is a bell-sized part in the transmission housing for the speed sensor.
The 4L80e can handle more than 700 horsepower. And it is likely to last for at least 500,000 miles.
Conclusion
It is not hard to find the 4L80e shift solenoid location. However, accessing it can be a pickle. But you don’t have to worry about either of these issues because you now know everything you need. If you have given this article a thorough read, you not only know the location of the component but how to access it as well. Just be careful while fiddling with the fluid compartment because it’s a sensitive part. And always keep the essential tools near your reach. This way, everything will be a breeze.
You Can Also Read: